Daily Archives: July 4, 2018

Common Fridge Problems You Can DIY

Repairman Fixing FridgeYou depend on your fridge a lot more than you think, but you ignore it most of the time and expect it to work 25 hours a day. It is only when it starts making weird noises or fails to cool properly that you give it any attention.

All Pro Appliance Service, Inc. explains that the easiest thing to do is call for a fridge service Salt Lake City. But if you want to save some money and do not mind getting your hands dirty, you might want to try your hand at a DIY repair job. Here are some common problems and possible solutions you can try:

Not Cooling

If your fridge is not cooling properly, you might have a problem with the evaporator fan, the condenser fan, or the defrost thermostat. You can replace the fans, but you will need a fridge service to replace the thermostat. Before trying anything drastic, clean the condenser coils first. Dirt and dust can keep your condenser from getting cool air into the fridge.

The condenser coils are usually at the back or under the fridge. If that does not fix the problem, check your fridge’s evaporator or condenser fans to see if they look like you need to replace them.

No Ice

If your fridge has an icemaker but is not producing ice, you may have a problem with the water inlet valve. If you know where that is, check to see if there are any tears or kinks in the hose. If you do not see any, there may be a clog in the hose or valve.

Before taking it out to check, make sure you turn off the water supply. Check the filter as well to see if you need to clean it. If you don’t see any clogs or you don’t know where the valve is, call a fridge service technician.

No Let Up

If you notice that your fridge is making too much noise, it may be cycling too often. That means the condenser is working overtime, a recipe for higher electric bills. A common cause of this is dirty condenser coils, so get your brush or vacuum cleaner and clean that up.

Common problems with your fridge sometimes require simple solutions. You can save some money by doing them yourself. However, if you feel you are not up to it, let the pros do it for you. s